Delver of the Cryptic Puzzle Solution Guide (2)

Next, I’ll show you the puzzle-solving process about Crane Support of event Delver of the Cryptic.

The main objective of this stage is to control the platforms to act as bridges to different areas until you reach the end. It should be noted that some of these platforms are fixed, while others will tilt according to the character’s weight on them.There are also platforms that can be rotated and lifted via the control panel.

Upon entering the stage, move forward first and turn left into the puzzle area.Once inside, head down to the lower right and go down the steps to find an interactive control panel.Interact with the panel to raise the platform.

After the platform rises, turn 180 degrees and head back the way you came.There’s a hidden treasure chest beneath the steps.

After collecting the treasure chest under the steps, return to the second floor and interact with the control panel in front of you to raise the platform and form a bridge.Don’t cross the bridge right away — there’s another treasure chest behind you, so don’t forget to pick it up.

After collecting the chest, move forward and cross two platforms to reach the new area.The second platform tilts under your character’s weight.Stand on one end first, wait for the platform to fully tilt, then cross over.

The next part of the puzzle is more complicated, so please follow the tutorial steps strictly.

Interact with the two control panels on the right and the one on the left respectively, to arrange the platforms into a path leading to the upper left, as shown in the image.

Go to the upper-left area. There is a tilting platform here.On the platforms on both sides of this tilting platform, you will find a treasure chest and a control panel respectively.The control panel opens the metal gate, which leads to the laser grid area.

Interact with the device in front of you to turn off the laser grid. Interact with the control panels on the left and right sides respectively to form a path to the upper-right area using the platforms.

In this area, you first need to move all platforms to the right, and interact with the farthest control panel on the right to lower the middle platform.

Then return the platforms to the middle position to build the path leading to the end point.